How to: Change Fog Light bulb
 

First of all I got to thank Wutangmo15 for his laziness to install the yellow fog lights & giving them to me to install.. I figure you guys would appreciate the simple How to:

You will need a Phillip screw driver. Which is looks like "+" sign at the tip.
Flat head screw driver will do you no good.

Here are the fog light bulbs
Nokya Hyper Yellow NOK7618
Pro Halogen
2500k_55w
Stage1 Stock Wattage
H11
http://img140.imageshack.us/img140/8...glightbulb.jpg

Go to the front of your RA.
There is(was) a philip screw where the red circle is. Remove the screw.
Once the screw is removed, Pop the cover off gently pull away from the bumper. The rest is held together by plastic tabs. Follow the direction of the arrows. This part is a bit tricky. Be careful you dont break it. Easy does it. Take it slow & be firm it should pop off.
http://img156.imageshack.us/img156/6...ghthousing.jpg

Pay close attention to the corner tab, it should be pulled straight out.

http://img171.imageshack.us/img171/6...lightcover.jpg

There are three philip screws small circles in red. Remove them. To remove the fog light housing.
Red boxes are the tab holes for the cover.
The bigger red circle is for the screw that hold the cover in place.

http://img641.imageshack.us/img641/1...assengersi.jpg

Driver side.
http://img440.imageshack.us/img440/5...thoutcover.jpg

http://img29.imageshack.us/img29/655...sengerside.jpg

Once the three screws are removed for the fog light housing should come right out, pull it out enough to expose the plug connector.
http://img810.imageshack.us/img810/5...gconnector.jpg

I spent more time than I needed to figuring out how to remove the plug..
Press the release tab in red circle with green fill. Gently & firmly wiggle the plug make sure you have the fog light housing secured so you dont chuck it away while trying to remove the plug.
http://img31.imageshack.us/img31/8059/foglightplug.jpg

Pic of the fog light housing removed.
http://img251.imageshack.us/img251/9...ingremoved.jpg

Fog light housing once removed.

http://img837.imageshack.us/img837/7...ghthousing.jpg

Turn the fog light bulb a quarter turn in direction of the red arrow to release the bulb from fog light housing. Pull bulb straight out.

http://img819.imageshack.us/img819/8...ghtbulboff.jpg

Fog light blub comparison. Do not touch the bulb. Handle the bulb from the connector. (plastic base).

http://img607.imageshack.us/img607/3...comparison.jpg

Installing new fog lights. From this position turn it a quarter turn back to the left to lock it in place.

http://img577.imageshack.us/img577/3...ovefogligh.jpg

New fog light blub locked in place.

http://img714.imageshack.us/img714/9...bulblocked.jpg

Re-Connect fog light housing back on the plug.

http://img511.imageshack.us/img511/5...connectfog.jpg

Screw the fog light housing back on. pop the cover back on.
Screw the cover back on.
http://img214.imageshack.us/img214/9...stallcover.jpg

Enjoy!
Happy Valentines day! RA LOVE.
-Mike

I will post pic of the fog light in action later....

mike r u serious...i read thru this thing called "owners manual" and did the whole set-up in 5 min and like 8 mths ago...mike...u r sooooooooo slow :D:p:D:p

Sry Im too slow for you RalliNurse. I had to learn how to read & write english first before I can read the "owners manual". ;):D

Nice write up. Good for those new owners wanting to do this

Nice...lol :D;)

good write up pretty str8 forward thx