ClubRalliart.com

ClubRalliart.com (http://www.clubralliart.com/index_forum.php)
-   Northeast (http://www.clubralliart.com/forumdisplay.php?f=28)
-   -   Fender Rolling in NJ (http://www.clubralliart.com/showthread.php?t=1741)

jRox 05-11-2011 02:40 PM

Fender Rolling in NJ
 
https://www.facebook.com/FenderRollingNJ

Hey ClubRA,

When I purchased my X MR wheels (18x8.5 +38 with 245/40's), I had my fenders rolled (only rears) by a shop at stock height. When I lowered about 2" all around on coils, I started having rubbing issues in the rear. This is because the shop did not roll the inner lip completely (check photos).

Rather than dealing with the shop, I decided to purchase a fender roller and do the work myself. Recently I was able to roll my rear fenders with no paint issues, cracks, etc [patience is key!]. I like to do everything right the first time around, so I didn't use a mallet, baseball bat, phonebook, and anything else creative you can think of.

Because I achieved great results with the fender roller, I am confident enough to offer fender rolling services in the Union, NJ 07083 area. Although I have little experience, your car will be treated as my own. I will do my best to ensure a clean roll with no paint issues. (I cannot guarantee no paint issues as all cars are different. All precautions in my control will be taken to minimize this risk.)

Most shops around here charge $50-$100 per fender.


My price: $35 / fender


BEFORE:
http://i176.photobucket.com/albums/w...SNV30205-1.jpg

http://i176.photobucket.com/albums/w...g/SNV30208.jpg


AFTER:
http://i176.photobucket.com/albums/w...g/SNV30211.jpg
It is not damage in the paint. There is white silicone lining that was removed.

http://i176.photobucket.com/albums/w...g/SNV30273.jpg

BravoZero 05-11-2011 03:41 PM

Very cool! Too bad I don't live closer, I'd take you up on this for sure!

Side note... which coilovers are those?

Jackal 05-12-2011 08:17 PM

Nice job! Does anyone else have Before during and after shots of their rear fenders getting rolled. I am looking for reference material to send to the bodyshop so they will be a little more prepared when they roll my fenders sometime tomorrow. I need them to see what the fender should look like to properly clear my 245mm rubber on my Evo X GSR rims.

I do Ice racing which is basically like drifting your car almost nonstop because there are not to many straightaways you just stay on the power and slide your car through the corners at speeds up to well what ever you can get away with. What I am trying to say is that I need lots of room in my wheel wells/ Fenders as my suspension is doing a lot of travel in many directions in regards to its normal orientation when stopped or at rest.

RalliArtist 05-12-2011 08:43 PM

wow you're pretty close to NYC. i might be in contact with you very soon.

total0wnage 05-13-2011 01:11 PM

Quote:

Originally Posted by BravoZero (Post 18511)
Very cool! Too bad I don't live closer, I'd take you up on this for sure!

Side note... which coilovers are those?

Their AMR coilovers. Jrox i will PM me the minute i get my coils in.

jRox 05-14-2011 12:53 PM

Quote:

Originally Posted by BravoZero (Post 18511)
Very cool! Too bad I don't live closer, I'd take you up on this for sure!

Side note... which coilovers are those?

One-off's by AMR Engineering :cool:

Quote:

Originally Posted by Jackal (Post 18611)
Nice job! Does anyone else have Before during and after shots of their rear fenders getting rolled. I am looking for reference material to send to the bodyshop so they will be a little more prepared when they roll my fenders sometime tomorrow. I need them to see what the fender should look like to properly clear my 245mm rubber on my Evo X GSR rims.

I do Ice racing which is basically like drifting your car almost nonstop because there are not to many straightaways you just stay on the power and slide your car through the corners at speeds up to well what ever you can get away with. What I am trying to say is that I need lots of room in my wheel wells/ Fenders as my suspension is doing a lot of travel in many directions in regards to its normal orientation when stopped or at rest.

These are all the before & after shots I have. Just make sure they roll the lip all the way around. Clearing 245's is no biggie.

Quote:

Originally Posted by RalliArtist (Post 18613)
wow you're pretty close to NYC. i might be in contact with you very soon.

Sure thing man. Let me know!

Quote:

Originally Posted by total0wnage (Post 18641)
Their AMR coilovers. Jrox i will PM me the minute i get my coils in.

No doubt. Hit me up!

jRox 06-26-2011 05:00 PM

BUMP for fitment!

aznnightkidz 07-21-2011 06:53 AM

wow good price, im going to be installing my bc coil overs today with a 1.75 in drop all around and ill be hitting you up if i have any rubbing since your so close

jRox 07-24-2011 01:25 PM

4 Attachment(s)
Quote:

Originally Posted by aznnightkidz (Post 21262)
wow good price, im going to be installing my bc coil overs today with a 1.75 in drop all around and ill be hitting you up if i have any rubbing since your so close

Where ya from? I'm available during the weekends. Let me know! :cool:

Attached a couple photos from over the weekend.

jRox 08-14-2011 10:58 AM

BUMP! :cool:


All times are GMT -7. The time now is 02:29 AM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright (c) 2011 RnD Media LLC