ClubRalliart.com

ClubRalliart.com (http://www.clubralliart.com/index_forum.php)
-   2009+ Lancer Ralliart Show and Shine (http://www.clubralliart.com/forumdisplay.php?f=14)
-   -   My build so far phase 1 of 5 Bang for the Buck (http://www.clubralliart.com/showthread.php?t=1066)

Jackal 11-30-2010 07:12 PM

Jack.A.L's Ongoing Ralliart Build Thread
 
I don't know where to start as I have done a pile of stuff to my car but the list of stuff I still have to do is a couple pages long so bear with me. I am gonna dump a basic list of what has been done and the costs associated with said work. I don't have enough time to post everything that has been done but will try and get it up over the next week or two. Enjoy!

Jackal 11-30-2010 08:27 PM

PART NAME AND /OR VENDOR
DESCRIPTION
COST

SHARKFIN ANTENNA
AFTERMARKET FIBERGLASS ANTENNA HOUSING PAINTED TO MATCH BODY COLOUR
http://i1198.photobucket.com/albums/...finAntenna.jpg


http://www.visualgarage.com/home.html
69.00 US

12.00 US SHIPPING

4.05 US TAXES
TOTAL 85.05 USD

Auto Trim Design of Winnipeg Ltd.
WINDOW TINT
50% TINT TO FRONT DOOR
GLASS 35% TO REAR DOOR GLASS & BACK WINDOW
$256.47
INCLUDED COST OF FELTS, TINT TAXES AND INSTALL.

TINTED WINDOW VENT VISORS
INSTALLED ON ALL DOORS
http://i1198.photobucket.com/albums/...VentVisors.jpg

$139.99

PLUS TAX AND INSTALL

ALUMINUM FUEL DOOR
AFTERMARKET REPLACED FACTORY PAINTED PIECE.

http://i1198.photobucket.com/albums/...s/Fueldoor.jpg

How it looks these days.
http://i1198.photobucket.com/albums/...oorPainted.jpg

Jackal 11-30-2010 09:10 PM

ULTIMATE RACING
Complete bolt-on catback exhaust system including 3" midpipe and dual muffler section with polished stainless steel tips
- 304 stainless steel piping
- 3/8" thick machined flanges
- Dual high-flow mufflers with straight through design
- 4" muffler tips (see below for choices)
- TIG welded to perfection -Bolt on performance


http://i1198.photobucket.com/albums/...nchExhaust.jpg

http://i1198.photobucket.com/albums/...Exhausttip.jpg
$ 750.00 USD

ULTIMATE RACING
MID PIPE WITH RESONATOR

http://i1198.photobucket.com/albums/...hresonator.jpgResonator added to Midpipe +$80.00 USD
Aids in the removal of in-cabin resonance which can occur in some vehicles
80.00 USD

ULTIMATE RACING-flow performance cat
Replaces the OEM catalytic converter with a 3" ceramic core high-flow performance cat
- 304 stainless steel piping
- 3/8" thick machined flanges
- TIG welded to perfection
- Ceramic high-flow catalytic converter (efficient to 450 hp)
- Unique bung design assists in eliminating CEL's
- Bolt-on
Extra Bung and Plug welded for future Wideband Sensor +$20.00 US
http://i1198.photobucket.com/albums/...ighFlowCat.jpg
250.00 USD + 20.00 USD

Jackal 11-30-2010 09:11 PM

ULTIMATE RACING
Bolt-on 3" Downpipe to replace the smaller OEM piece
304 stainless steel piping
- 3/8" thick machined flanges
- Bolt-on

http://i1198.photobucket.com/albums/...chDownpipe.jpg

$150.00 USD

ULTIMATE RACING
Complete Upper Pipe Kit that eliminates OEM "fabric" piping that connects turbocharger to intercooler
(2 Pipe Kit)
2.5" Stainless Steel Piping
- Bead Rolled Pipe Ends
- 3-ply Silicone Hose
- Polished Finish
- Bolt-On
- Blue or Black Silicone Hose no charge

http://i1198.photobucket.com/albums/...pICPipekit.jpg


$170.00 USD


ULTIMATE RACING
Complete Lower Pipe Kit that connects intercooler outlet to throttle body
(2 Pipe Kit)
2.5" Stainless Steel Piping
- Bead Rolled Pipe Ends
- 3-ply Silicone Hose
- Polished Finish
- Bolt-On

Black Silicone Hose no charge

http://i1198.photobucket.com/albums/...mICPipeKit.jpg
$195.00 USD

Evolution X Intercooler
Upgraded to Evo X Intercooler which was twice as big.
Can you see the difference?
http://i1198.photobucket.com/albums/...tockEvoXIC.jpg


$ 200.00 Can

Jackal 11-30-2010 09:12 PM

Lancershop.com
HKS SSQ Blow off valve
HKS Super SQV BOV with flange adaptor
http://i1198.photobucket.com/albums/...owOffValve.jpg

$360.00 USD

HKS Recirculation Kit
Parts needed to change HKS Blow off valve to full recirculation back into stock intake.
$75.00 USD

Lancershop.com
K & N High Flow Panel Air Filter
http://i1198.photobucket.com/albums/...y/KNFilter.jpg

$50.00 USD

Rally Armor Urethane Mud flaps

http://i1198.photobucket.com/albums/...neMudflaps.jpgAprox
$160.00 USD Once you add in Shipping, Duty, Taxes Etc.

Installation Note: Make sure you order the ones for a regular Lancer for proper fit.

Jackal 11-30-2010 09:18 PM

AS you can see so far all my mods have been of the bolt on Variety. I will continue on with video and pics from my tune then onto Stereo upgrades. I found the Rockford Fosgate nav package along with the rain sensing wipers and sunroof did not justify an additional $ 7000.00 plus tax. So I got the stock CD AM/FM 6 speaker system and pretty much gutted it except I kept the stock deck until I can afford a new aftermarket double din unit in the new year. Stay tuned! Lots more to come.

Jackal 11-30-2010 09:24 PM

Just a few pics of my car.
http://i1198.photobucket.com/albums/...geDistrict.jpg
http://i1198.photobucket.com/albums/...eDistrict2.jpg
http://i1198.photobucket.com/albums/...s/100_8618.jpg
http://i1198.photobucket.com/albums/...s/100_8621.jpg

Mkid 11-30-2010 09:31 PM

I see your going with the HKS BOV. I love the way that one sounds but I heard it negatively effects performance. Does the recirculation kit fix that?

MTZL 11-30-2010 09:47 PM

thats some budget on mods & mod list. Your RA looks great!

wutangmo15 11-30-2010 10:59 PM

UR must love you. Can you record a sound clip. I'm thinking of doing what you did with exhaust but I don't want it too loud.

I love the Blue color. Wish I had it.


All times are GMT -7. The time now is 04:07 AM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright (c) 2011 RnD Media LLC