Make sure to turn the wheel to one side to get to the screws & bolt in the wheel well.
I didnt use a jack or lift (which would make this job easier)
After bruised knees & elbows. (took 5 min break)
Remove 5 x 10mm bolts that hold your splash guard to your front lower bumper.
Remove 2 x poppers on each side. ok 4x poppers.
10mm bolt at the nose of your front bumper on the passenger side.
another 10mm bolt at the driver side.
all the fasteners are having a safety meeting here.
Some poppers are different so they hang out in respective location.
Top 10mm bolts are shorter than 10mm bolts at the bottom to hold the splash guard.
http://i1169.photobucket.com/albums/...b/TeethTab.jpg