View Single Post
  #5  
Old 02-26-2014, 07:14 AM
Drew's Avatar
Drew Drew is offline
Moderator
 
Join Date: Sep 2010
Posts: 725
Default

Love the write up! Just wanted to add that I would recommend drilling the spindle out in 2 stages, first starting with a 1/2" (0.500", 12.7mm) drill bit, then finishing it up with either a 9/16" (0.5625", 14.3mm), or a 14.5mm bit. A 5/8" is 15.9mm in diameter, and overkill for what is needed to clear the 14mm bolt. Thanks again for an amazing write up!
Reply With Quote