View Single Post
  #1  
Old 06-28-2010, 12:11 PM
MTZL's Avatar
MTZL MTZL is offline
Super Moderator
 
Join Date: Apr 2009
Location: Mountain Zone Lancer (MTZL)
Posts: 4,060
Default How to: Remove front bumper

Ok It took me about two hours, lack of proper tools.
10mm socket & wrench (1HOUR LOOKING FOR MISSING 10MM SOCKET)
socket extension (half an hour looking for socket extension)
Screw drivers (Flat Head & Phillip Head)




Remove poppers. You can do this by using a flat head screwdriver twisting motion. May want to use cloth at the head of the screwdriver to protect the poppers.
Remove the intake snorkle.
Remove the radiator shroud.


Remove 5 x 10mm bolts & disconnect the fog light plug.



http://i1169.photobucket.com/albums/...WellScrews.jpg

Remove the 10mm bolt & plastic screws inside your wheel well.
Do this for both driver while wheels are pointed to the passenger side &
passenger side while the wheels are pointed to the driver side. :P
__________________

Last edited by MTZL; 03-11-2012 at 09:31 PM.
Reply With Quote