10-28-2011, 11:06 AM
|
Member
|
|
Join Date: Feb 2011
Posts: 77
|
|
Upgraded RA Turbo by FP
This was brought up in another thread on another forum, but I thought I'd share it here too. FP informed me they are able to upgrade a stock RA turbo to a 65mm HTA wheel with a 43 lb/min flow rate.
Here is the e-mail thread of my conversation with Robert at FP for reference.
My Original e-mail:
Quote:
Just curious if you have any plans to make a hybrid turbo out of the Mitsubishi Ralliart turbo (TD04HL-15T-7)? CBRD has done so and dubbed it the RAD Lite, however I wanted to see if you plan on, or if I provided my stock turbo, will create something similar?
|
Roberts Response:
Quote:
Ryan, we can do such a thing of course. If fact we have done it on a number of occasions, but the results do not equal the power from the stock non ralliart turbo system and in my observations isnt really very useful for that reason. I am unaware of any constraint anywhere that requires the ralliart owner to retain the tiny TD04 turbo in order to participate in racing, so abandoning the TD04HL is about the smartest decision you could make. Ok, so now that full disclosure has occurred I would be happy to make a tiny ralliart turbo a tiny bit bigger
|
My Response:
Quote:
Robert,
Thank you for the quick reply. While I am aware that the TD04 is a tiny turbo and I could move up to a TD05/Evo X Stock housing based turbo, it would require the o2 housing, manifold, and quite a few other parts from an X. My other issue is intakes. The information I have found has indicated a Evo-X intake (aftermarket or stock) is needed to go that direction, and with that comes battery relocation or a small battery. I also kind of like the idea of doing something different. To be honest I have a relatively modest goal of 300 – 320 WHP… which seems doable upgrading the TD04… correct me if I am wrong.
I also know quite a few others on EvolutionM.net are looking to avoid going the X swap route and just want something bolt-on, tune, and go. While CBRD offers such a thing, they don’t list a price, and getting ahold of them is difficult. .... If FP were to offer a similar upgrade without the hassle, I believe the outcome would be beneficial to both FP and the community of Ralliart owners.
So what would be next steps to getting something like this started, and what do you think the overall costs would be? I have a spare TD04 I can ship to you to do some research on.
Thank You,
Ryan
|
Roberts Response:
Quote:
Ok, there isnt any research that needs to be done, the programs are already written for the wheels and the cover recontour. Sned it over and we'll do one up for you. If the core is good we will go a billet HTA upgrade for $795. It is a 65mm HTA wheel with a 43 lb/min flow rate that. This is the same wheel we use in the twin 997 aplication which normally operates around 700whp in the P-cars. Robert
|
My Reply
Quote:
Robert,
Sounds good to me. Will there be any work done to the actuator? I know this thing runs out of breath on the top end and from what I’ve read that should address that issue… again, I’m just going off what I’ve read, you’re the expert, not me.
Where can I send the turbo? Should I send it, let you take a look to make sure we’re good to go, then make payment, or do you require payment up-front?
Thanks,
Ryan
|
Robert's Reply
Quote:
of course it runs out of breath on the top end, its a itsy bitsy turbo with a itsy bitsy turbine housing and a itsy bitsy turbine housing on a motor that deserves so much more. No payment until the work is done use the turbocharger check in sheet from the turbocharger rebuild section of the website. I dont have any updated actuators for that turbo, honestly it wouldnt do a whole lot besides make it easier to destroy the turbo with overspeed since it is so small.
|
|
10-28-2011, 11:08 AM
|
|
Super Moderator
|
|
Join Date: Mar 2011
Location: NoVA
Posts: 3,212
|
|
We chatted about this in person, but this dude is very snarky.
__________________
-2014 Ford Focus ST///2.0L EcoBoost, 6 speed manual, ST3 package, Ingot Silver Metallic
-2011 Mitsu Lancer RALLIART "Veronica" (RETIRED)
|
10-28-2011, 11:12 AM
|
Member
|
|
Join Date: Feb 2011
Posts: 77
|
|
I did share my opinion on the matter with you in person, but figured I'd keep it outta here and simply provide the information I have so others can make their own decision.
|
10-28-2011, 11:19 AM
|
|
Super Moderator
|
|
Join Date: Mar 2011
Location: NoVA
Posts: 3,212
|
|
Word.
However, if this were to happen, this might be a good thing.
__________________
-2014 Ford Focus ST///2.0L EcoBoost, 6 speed manual, ST3 package, Ingot Silver Metallic
-2011 Mitsu Lancer RALLIART "Veronica" (RETIRED)
|
10-28-2011, 11:58 AM
|
|
Super Moderator
|
|
Join Date: Apr 2009
Location: Mountain Zone Lancer (MTZL)
Posts: 4,060
|
|
Thanks Ryan
for the inquiry & info.
The more initiative we show towards our RA the more doors will open.
__________________
|
10-29-2011, 10:21 PM
|
|
Senior Member
|
|
Join Date: Nov 2009
Location: Victorville, CA
Posts: 382
|
|
Great discussion, In my opinion CBRD is better than FP, I'm going with the Lite. Isn't the Lite $900? Anyone know.
|
10-30-2011, 07:43 AM
|
|
Senior Member
|
|
Join Date: Feb 2011
Location: tucson
Posts: 260
|
|
Quote:
Originally Posted by Tuqwik4u
Great discussion, In my opinion CBRD is better than FP, I'm going with the Lite. Isn't the Lite $900? Anyone know.
|
yea i paid 895
|
10-30-2011, 06:13 PM
|
|
Senior Member
|
|
Join Date: Nov 2009
Location: Victorville, CA
Posts: 382
|
|
Quote:
Originally Posted by RG-RA
yea i paid 895
|
Nice, Is ur RA up and running?
|
11-02-2011, 06:18 PM
|
Member
|
|
Join Date: Oct 2011
Posts: 53
|
|
Is there a way to replace journal bearings with ball bearings when shipping the turbo to such a company?
|
11-27-2011, 09:19 PM
|
|
Senior Member
|
|
Join Date: Nov 2010
Location: Irving, TX
Posts: 204
|
|
Quote:
Originally Posted by Skyline Fever
Is there a way to replace journal bearings with ball bearings when shipping the turbo to such a company?
|
Ball bearings isn't really going to make a huge difference on SST trannys
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 07:44 PM.
|
|